How Much Does Pool Deck Leveling Cost in Michigan?
Pool deck leveling is one of the higher-cost residential concrete repair jobs — but it's still dramatically less than deck replacement, and the case for leveling over replacement is particularly strong for pools.
Typical pool deck leveling costs in West Michigan:
- Small residential pool deck (partial leveling, 2–4 panels): $1,200–$3,000
- Standard residential pool deck (full perimeter): $2,000–$6,000
- Large or complex pool deck: $4,000–$10,000+
- Polyurethane foam (recommended for most pools): Premium of 20–40% over mudjacking
Pool deck replacement — demolition, hauling, forming, pouring, and finishing — typically runs $15,000–$30,000+ for a full residential pool deck. That figure doesn't include landscaping restoration, time out of commission, or the disruption to pool access during construction.
Leveling addresses the settled panels in hours. The pool never needs to be drained.
Why Poly Foam Is the Standard for Pool Decks
We use polyurethane foam for most pool deck applications, which is part of why pool deck costs run higher than standard slab work.
Foam weighs 2–4 lbs/cu ft — a fraction of mudjacking's ~100 lbs/cu ft. For a pool deck sitting on fill that's already shown it moves, adding the weight of mudjacking slurry creates risk of further settlement. Foam fills voids without adding meaningful load.
Foam is also water-resistant. Pool decks are perpetually wet — splash-out, overflow, rain. Mudjacking material can erode in sustained wet conditions. Foam holds indefinitely.
And foam cures in minutes. Pool access is typically restored within an hour.
What Drives Pool Deck Leveling Cost
Number of settled panels. A pool deck with two settled sections costs less than one where eight panels around the full perimeter have shifted.
Degree of settlement. A panel that's dropped an inch over a small void needs less material than one that's settled three inches over a large void beneath the pool backfill.
Pool deck configuration. Decks with coping, decorative borders, or confined access points take more time to work around — injection points need to be planned carefully.